HY-708H Organic Bentonite for Solvent-Based Coatings and Inks

HY-708H organic bentonite from Hongyu is a rheological additive for low- to medium-polarity solvent systems. Its recommended applications include paints, printing inks, color pastes, and adhesives.

Hongyu produces HY-708H from natural calcium-based bentonite through purification and modification processes. With an appropriate polar activator, the product offers fast dispersion, rapid gel development, and fine dispersion. In addition, it provides anti-settling performance within the formulation.

Easy Dispersion with a Polar Activator

HY-708H requires a polar activator to achieve full activation. With a suitable activator level, it disperses quickly and develops a gel structure.

For best dispersion, the product information recommends high-shear equipment. It also recommends preparing a pre-gel and adding it before grinding.

Therefore, formulators should consider both the activator and the dispersion process when evaluating HY-708H. These factors help determine how the additive performs in the selected system.

Anti-Settling Performance

HY-708H organic bentonite provides anti-settling capability in suitable solvent-based formulations.

This feature makes it relevant to paints, color pastes, and inks that require control of settling. Moreover, its suitability for low- to medium-polarity systems gives formulators a defined starting point for product selection.

Evaluate the additive in the complete formulation to establish the appropriate dosage. Then check dispersion quality and settling behavior against your product requirements.

Recommended Applications

The supplied product information lists the following applications:

  • Paints and color pastes
  • Printing inks
  • Adhesives
  • Industrial coatings
  • Anti-corrosion coatings
  • Marine coatings

For these applications, first confirm that the solvent system falls within the recommended polarity range. Next, assess the additive with the intended resin, pigments, and other formulation components.

Typical Properties of HY-708H Organic Bentonite

PropertyListed value
AppearanceWhite powder
Loss, as listed in the source*23–31%
Fineness, 200 mesh≥95%
Volatile content at 105°C0.8–3.5%
Suggested addition level0.2–3.0%

The supplied table labels this property as “Loss” without stating the test conditions. Request the technical data sheet for clarification.

The suggested addition range provides a starting point for formulation trials. However, the source does not specify its calculation basis, so confirm this with Hongyu before preparing a batch.

Pre-Gel Preparation and Activation

Hongyu recommends preparing a pre-gel before incorporating HY-708H into the grinding stage. In addition, high-shear processing helps achieve the desired dispersion.

The product information lists several polar activator options:

  • Propylene carbonate
  • 95% methanol
  • 95% ethanol

The activator amount generally corresponds to 20–35% of the organoclay amount, with adjustment according to the formulation system. This percentage refers to the activator relative to the organoclay, not to the total coating formulation.

Before production, confirm the activator choice and addition sequence with the supplier. Also, follow the relevant safety data sheets when handling solvents and activators.

Formulation Evaluation

To evaluate HY-708H organic bentonite, begin with the solvent blend and target application. Then select an appropriate activator and prepare the pre-gel under suitable mixing conditions.

During trials, review:

  • Dispersion quality
  • Gel development
  • Formulation consistency
  • Settling behavior
  • Compatibility with the complete system

Finally, adjust the organoclay and activator levels according to the results. This approach helps establish a suitable formulation and production process without assuming that one dosage fits every application.

Packaging and Storage

HY-708H comes in an outer kraft paper bag with an inner polyethylene liner, or in a valve-mouth paper bag.

The standard package weight is 25 ± 0.25 kg. Packaging can also follow customer requirements.

Store the product unopened in dry conditions at 0–30°C. Under these conditions, the stated shelf life is 36 months.

Request Technical Information and Samples

For manufacturers developing solvent-based coatings, inks, or adhesives, HY-708H organic bentonite offers easy dispersion with a suitable polar activator and anti-settling performance.

Contact Hongyu to request the technical data sheet, discuss sample availability, and confirm processing recommendations. Share your solvent blend, resin system, and target properties to support the technical discussion.

Visit Hongyu’s official website for more information.